Filter
Top Products
Minisphere™ User Manual (Rev. 1) Page 11 of 15
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (either Static,
Automatic, or Sound) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Sound-
Active
Mode
To enable the Sound-Active mode, do the following:
1. Press <MENU repeatedly until SNd shows on the display.
2. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Automatic
Programs
To enable the automatic programs, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> select an automatic program from P 1–P 9.
4. Press <MENU> until S-- shows on the display.
5. Press <UP> or <DOWN> to adjust the speed of the automatic programs
(S 1–S100).
6. Press <ENTER>.