Filter
Top Products
Legend™ 230SR Beam QRG EN
2
About this
Guide
The Legend™ 230SR Beam Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and
DMX values. Download the User Manual from www.chauvetpro.com
for
more details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
Safety Notes
· DO NOT open this product. It contains no user-serviceable parts.
· DO NOT look at the light source when the product is on.
· CAUTION: This product’s housing is hot when lights are operating.
· CAUTION: This product’s beam is hot when lights are operating. Be
careful not to aim at fire sprinklers or alarms when in use.
· Mount this product in a location with adequate ventilation, at least
40 ft (12.2 m) from objects to be lit.
· DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
· USE a safety cable when mounting this product overhead.
· DO NOT operate this product if the housing, lenses, or cables appear
damaged.
· DO NOT connect this product to a dimmer or rheostat.
· ONLY connect this product to a grounded and protected circuit.
· ONLY use the hanging/mounting bracket or the handles to carry this
product. Do not carry by the moving head.
· In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 104° F (40° C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit www.chauvetlighting.com
for
contact information.
What Is
Included
· Legend™ 230SR Beam
· 2-Omega Bracket
· Warranty Card
· Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1. Disconnect this product from power.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove blown fuse and replace with a fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.