Open as PDF
EN COLORdash™ Par-Tri 18VW QRG
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 15 COLORdash™ Par-Tri 18VW products at 120 VAC or
at 230 VAC. Never exceed this number. Power linking cords can be
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
3. Remove blown fuse and replace with a good fuse of the same type and
4. Screw the fuse holder cap back in place and reconnect power.
The COLORdash™ Par-Tri 18VW will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
The COLORdash™ Par-Tri 18VW uses a regular DMX data connection for its
DMX personalities: 2 Ch, 3 Ch, and 7 Ch. See the User Manual to connect and
configure for DMX operation.
The COLORdash™ Par-Tri 18VW uses the DMX data connection for its
ter/Slave mode. See the User Manual to connect and configure for