Filter
Top Products
Assembly
8 Rev 90037-20080818
Step 8 – Attach ball coupler
and chain
1. Attach the coupler to tow bar using
M12x80 bolts, M12 flat washers and lock
nuts.
2. Attach two chains to tow bar using
M12x90 bolts, M12 flat washer and lock
nuts.
Step 9 – Attach wheel
fenders
1. Attach two fenders using M10x25 bolts,
M10 lock washers, flat washers and lock
nuts.
Step 10 – Attach Hydraulic
Hoses
1. Thread the outlet connector (59) to the
top of the gear pump (47). Use Teflon
tape to ensure tight fit.
2. Place an O ring (61) onto the exposed
threads of the outlet connector. Then
attach hose (13) to outlet connector
3. Attach hose (15) to the port on the oil
tank. Place an O ring on the port and
tighten the hose using Teflon tape.
4. Attach oil hose (60) to the bottom of the
gear pump (47).