Filter
Top Products
www.CasablancaFanCo.com
1.888.227.2178
15
M8521-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company
Make sure the upper switch housing is securely attached to
the mounting plate. Failure to properly secure all 3 assembly
screws could result in the switch housing xture falling.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Screw two housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three screws.
Switch Housing