Filter
Top Products
MA004-01 • 07/24/13
1.888.830.1326
8
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Upper
Switch
Housing
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
Feed the wires through the switch
housing cap, washer, and nut. Then
install the switch housing cap by twisting
clockwise onto the threaded rod, making
sure the gasket stays in line with the top
of the light kit. Install the washer and nut
onto threaded rod and tighten securely.
Threaded
Rod
Washer
and Nut
TYPE-C ASSEMBLY INSTRUCTIONS
If your fan does not have pin connectors
on the wires coming from the switch
housing, install the wiring harness
provided. Using the provided wire
connectors connect the white wire from
the fan to the white wire from the wire
harness and connect the black or blue
wire from the fan to the black wire from
the wire harness.
3 4
Wire
Connector
Switch
Housing
Do not allow the light kit to hang
only by the wire connections!
1 2