Filter
Top Products
Keep hose away
from sharp
objects Bursting hoses may cause
injury. Examine hoses regularly and
replace if damaged. Do not attempt
to mend a damaged hose.
UNPACKING
Remove the equipment and all parts
from the carton. The carton should
contain the following:
• Onepressurewasher(pump,engine,
cart base)
• Onecarthandleassembly
• Onespraygunandquickconnect
lance
• Fivespraytips
• Onehighpressurehose
• Onepackofnuts,bolts,andmanuals
If any parts are missing, DO NOT
RETURN THE UNIT TO THE RETAILER.
Know the unit’s model number (located
on the serial number tag on the
pressure washer frame) and call 1-800-
330-0712 for replacement parts.
After unpacking the product, inspect it
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings and bolts before using
the pressure washer.
Do not operate
the unit if
it’s damaged during shipping,
handling, or use. Damage could
result in bursting and cause injury
or property damage.
ASSEMBLY
1. Slide the handle assembly over the
lowerlegsofthecartbase.Usethe
star knob and bolt to secure the
legs. See Figure 1.
PW2725, PW3230, PW4035
Pre-Operation
2. Slide clear plastic detergent hose
onto brass hose barb (See Figure 2).
3. Insert quick connect spray tips into
rubber holders on front of the
placard. (See Figure 3).
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 4).
5. Connect the high pressure hose to
the pump outlet (See Figures 4 and
5).
6. Attach the lance with nozzle to the
gun (see Figure 6).
Figure 3 - Insert spray tips into the
holder
www.chpower.com
5
Figure 2 – Attach suction tube to barb
fitting
Figure 5 – Connect high pressure hose
to pump
Figure 6 – Attach lance to gun
Figure 1 – Assemble Handle
Star
Knob
Figure 4 - Pump hook up
Garden Hose
Pump
Inlet
Pump
Outlet
High Pressure
Hose
Chemical Injector
Hose Barb
Thermal
Relief