Filter
Top Products
17 Sp
13 mm
OUTLET
INLET
Figura 9
Interruptor
"On/Off"
(Encendido/
Apagado)
Pistola
Manguera de
alta presión
Instrucciones de Montaje y Lista de Piezas PW1686
Manguera
de jardín
Notas
4
www.chpower.com
Assembly Instructions and Parts List PW1686
13 mm
OUTLET
INLET
Figure 9
1. Insert lance into the gun and turn
clockwise to positive stop as shown in
Figure 8.
2. Ensure that the power switch is in the
“OFF” position.
3. Attach the high pressure hose and
gun assembly to the unit.
4. Connect garden hose as explained
under
Garden Hose Connection
Instructions
.
5. Plug the power cord into a grounded
120V outlet, that is on a dedicated
circuit.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the “ON/OFF” switch to the
“ON” position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
System Connection
Figure 8 - Gun/Lance Connection
Gun
High
Pressure
Hose
On/Off
Switch
Garden
Hose