Assembly Instructions and Parts List
PW1586 & PW1587
Garden Hose Connection
Instructions
1. Attach nipple adapter to inlet fitting
on the unit (this may already be
attached to the pump).
2. Attach quick connect fitting to
garden hose.
3. Pull side “A” of quick connect fitting
toward garden hose and push onto
nipple adapter.
4. Push side “A” of quick connect fitting
towards nipple adapter and release.
"A"
Figure 2 - Garden Hose Connection
Quick Connect Fitting
Garden Hose
Nipple
Adapter
! IMPORTANT !
This pressure washer is equipped with a
microswitch sensitive to water flow. This
Instant Start/Stop switch (ISS) senses
water flow in the pump. When the trig-
ger is released, water stops flowing
through the pump. The ISS then auto-
matically turns the motor off to protect
pump from overheating.
OPERATION
1. Pull trigger on gun.
2. Turn the “ON/OFF” switch to “ON”.
3. Release trigger. The pressure washer
motor will stop running.
4. To spray again, pull trigger and motor
and pump will restart.
Note: Occasionally the motor may run
for a short time to bring fresh, cool
water into the pump even if trigger is
released. This is part of normal operation
and will not damage the unit.
Always turn the
“ON/OFF” switch to “OFF” then
trigger gun to release hose pressure before unplug-
ging power cord.
Risk of equipment dam-
age. Always make sure the
“ON/OFF” switch on the unit is “OFF” and unit is
unplugged prior to storage.
Risk of Injection.
Unit will start spraying when trig-
ger is squeezed if on/off switch is in “ON” position.
Always point gun in safe direction.
!
WARNING
!
CAUTION
!
CAUTION
Call 1-800-330-0712
for Technical Service
2
www.chpower.com
Power Cord
1. Plug the power cord into a grounded
120V outlet and press the reset
button as shown in Figure 3.
2. THIS MUST BE DONE EACH TIME THE
UNIT IS PLUGGED IN AN OUTLET.
Reset
Figure 3 - Grounded plug/reset button
1 Lanza regulable PM257000SV 1
2 Lanza turbo PM022621AV 1
3 Manguera PM243700AV 1
4 Pistola PM037203AV 1
5 Adaptador de manguito PM022100AV 1
6 Conector rápido PM020600SV 1
7 Limpiador de puntas PM008500AV 1
8 Sujetador de rueda PM342200SV 2
9 Rueda PM342210SV 2
10 Soporte delantero PM270040SV 1
11 Detergent bottle PM270010SV 1
12 Mango PM342230SV 1
13 Paquete de hardware PM343900SV 1
14 Anillo en O PM232200SV 1
15 Tapa del tanque de agua PM060000SV 1
16 Cepillo de cerdas de nylon PM343905SV 2
17 Cepillo de cerdas de bronce PM343910SV 2
18 Cepillo triangular PM343915SV 1
19 Paño para el cepillo triangular PM343920SV 1
20 Boquilla de la limpiadora a vapor PM343925SV 1
Para ordenar repuestos, sírvase llamer al 1-800-330-0712 (En los Estados Unidos, o
llame a su distribuidor local)
Sírvase proporcionar la siguiente información:
-Número de modelo
-Número de serie (si lo hubiera)
-Descripción y número del repuesto, según se
indica en la lista de repuestos.
No. de Número del
Ref. Descripción Repuesto Ctd.
Instrucciones de Montaje y Lista de Piezas
PW1586 & PW1587
Dirija toda la correspondencia a:
Campbell Hausfeld
Attn: Customer Service
100 Mundy Memorial Drive
Mt. Juliet, TN 37122 U.S.A.
1
8
4
2
3
5
6
7
12
11
10
9
13
13
14
15
8
9
18
19
16
17
20
15 Sp