Filter
Top Products
7
PW1049
Description (Continued)
impact to 60º wide fan by twisting the
nozzle. Adjust pressure from high to
low by extending nozzle 1/2".
Note: Nozzle must be at minimum
pressure to suction detergent.
Turbo (Rotary)
Nozzle
Excellent for deep-
cleaning tough surfaces,
such as stained concrete,
four-wheelers/off-road motorcycles, or
siding. Combines the power of a
narrow, high-impact stream with the
efficiency of a 25º fan pattern.
TYPE F ADAPTER
Type F - Fits most Black
& Decker, Powerwasher
and Husky brand electric
units.
TYPE K ADAPTER
Type K - Fits most
Karcher brand units.
Directions for
Use
1. Engage spray gun trigger safety
latch in the safe position.
2. Disconnect existing lance/nozzle
from gun.
3. If an adapter is necessary, push it
into the end of the gun, then twist
to lock the bayonet tabs into place.
Make sure it is securely in place
before spraying.
4. Connect Quick Click lance to gun.
5. Connect (push) desired Quick Click
nozzle into end of Quick Click
lance.
6. Complete cleaning project.
7. To disconnect nozzle, pull sliding
collar on lance away from nozzle.
• Due to their increased cleaning
power, Quick Click nozzles can cause
damage to vehicles, woodwork,
paint, loose cement and other soft
materials. Use with caution.
HOW TO AVOID DAMAGING
SURFACES
Damage to cleaning surfaces occurs
because the impact force of the water
exceeds the durability of the surface. You
can vary the impact force by controlling
the nozzle’s fan pattern, the nozzle’s
angle to the cleaning surface, and the
nozzle’s distance from the cleaning
surface. Never use a narrow high impact
stream or a Turbo/rotary nozzle on a
surface that is susceptible to damage.
Avoid spraying windows with a narrow
high impact stream or turbo nozzle.
Doing so may break the window. The
most sure way to avoid damaging
surfaces is to follow these steps:
1. Before triggering the gun, adjust the
nozzle to a wide fan pattern.
2. Place the nozzle approximately 4-5
feet away from the cleaning surface.
Then hold the nozzle at a 45 degree
angle to the cleaning surface. Trigger
the gun.
3. Vary the fan pattern spray angle and
the distance to the cleaning surface
until optimum cleaning efficiency is
achieved without damaging the
surface.
NOTICE
2
www.chpower.com
Operating Instructions and Parts Manual
alto impacto o con una boquilla turbo.
Al hacer esto puede quebrar la
ventana. La forma más segura de
evitar dañar las superficies es seguir
estos pasos:
1. Antes de apretar el gatillo, ajuste
la boquilla en un patrón en
abanico amplio.
2. Coloque la boquilla aproximada-
mente a 4-5 pies (1-1.5 m) de
distan-cia de la superficie de
limpieza. Luego sostenga la
boquilla en un ángulo de 45
grados con respecto a la superficie
de limpieza. Dispare la pistola.
3. Varíe el ángulo de rociado del
patrón en abanico y la distancia a
la superficie de limpieza hasta
lograr una óptima eficiencia de
limpieza sin dañar la superficie.
Notas