Filter
Top Products
Keep hose away
from sharp objects
Bursting hoses may cause injury. Examine
hoses regularly and replace if damaged.
Do not attempt to mend a damaged hose.
UNPACKING
Remove the equipment and all parts from
the carton. The carton should contain the
following:
• Onepressurewasher(pump,engine,
cart base)
• Onecarthandleassembly
• Onespraygunandquickconnect
lance
• Fivespraytips
• Onehighpressurehose
• Onepackofnuts,bolts,andmanuals
If any parts are missing, DO NOT
RETURN THE UNIT TO THE RETAILER.
Know the unit’s model number (located
on the serial number tag on the pressure
washer frame) and call 1-800-330-0712
for replacement parts.
After unpacking the product, inspect it
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings and bolts before using
the pressure washer.
Do not operate the
unit if it’s damaged
during shipping, handling, or use.
Damage could result in bursting and
cause injury or property damage.
ASSEMBLY
1. Slide the handle assembly over the
lowerlegsofthecartbase.Usethe
star knob and bolt to secure the legs.
See Figure 1.
Figure 1 – Assemble Handle
2. Slide clear plastic detergent hose onto
brass hose barb (See Figure 2).
PW4035
www.chpower.com
Figure 4 - Pump hook up
Pre-Operation
Figure 2 – Attach suction tube to barb
fitting
3. Insert quick connect spray tips into
rubber holders on front of the
placard. (See Figure 3).
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 4).
5. Connect the high pressure hose to the
pump outlet (See Figures 4 and 5).
Figure 5 – Connect high pressure hose
to pump
6. Attach the lance with nozzle to the
gun (see Figure 6).
Figure 6 – Attach lance to gun
5
Star
Knob
Figure 3 - Insert spray tips into the
holder
Garden Hose
Pump
Inlet
Pump
Outlet
High Pressure
Hose
Chemical Injector
Hose Barb
Thermal
Relief