Campbell Hausfeld CP5101 Pressure Washer User Manual


 
10
Operating Instructions and Parts Manual
www.chpower.com
Assembly and Preoperation
ASSEMBLY AND PREOPERATION
1. Slide the handle assembly over the
lower legs of the cart base. Use the
(supplied) star knob and bolts to
secure the handle to the legs (See
Figure 9).
2. Insert spray tips into rubber tip holder
(See Figure 10).
3. Brass Swivel Adaptor (see Figure
12). If it’s not already attached to
the pump inlet, assemble the brass
swivel adapter and attach it to the
pump inlet (see Figure 11). Be sure to
connect the correct side of the brass
swivel adapter to the pump.
4. Secure garden hose (not included) to
the inlet connection on pump (See
Figure 11).
5. Connect the high pressure hose to the
pump outlet (See Figure 13).
6. Connect the high pressure hose to the
gun (See Figure 14).
7. Attach the lance to the gun (See
Figure 15).
8. Install quick connect tip (See
Figure 16).
Figure 16 - Quick connect tip
Figure 9 - Assemble handle
Figure 15 - Attach lance to gun
Figure 11 - Pump hook up
Pump
Outlet
Detergent
Hose Barb
Pump InletGarden
Hose
Thermal Relief Valve
Figure 10 - Insert spray tips into the holder
Figure 13 - Connect high pressure hose to
pump
Figure 14 - Attach high pressure hose to
gun
Figure 12 - Brass swivel adapter
Connect This End To
Garden Hose
Washer
Washer With
Filter Screen
Connect This
End To Pump