Filter
Top Products
2009 Spa Surrounds
LTR20091033, Rev. A
Assembly
www .calspas.com
1
Whether you assemble your surround package yourself or hire someone to do it, your new surround package
needs to be assembled in a specic order. Our Cal Enclosures professionals have determined through their
experience that this is the easiest way to assemble your surround package.
Tools and Materials
Utility knife 25’ tape measure Cordless drill
100’ extension cord Electric drill Phillips-head drill tips
1/8” pilot hole drill bit 9/16” socket Slotted-head drill tips
Sandpaper (various grades) Redwood stain Wood putty
Gray wash stain Rags 1/2” ratchet and impact drill
1/2” carbide drill bit (masonry bit)
Step Assembly
Two Tier, 30” Step
Stand the legs up at 30” apart. Place the upper step on top of the upper section of the step.1.
To attach the step, screw in 4 screws (2 at each rear corner): 1 into the step leg and 1 into the step itself.2.
Place the lower step on the lower section of the step.3.
To attach the step, screw in 4 screws (2 on each on the outside of the step). Use the toe-in method on both 4.
sides, as shown.
Assembly