Filter
Top Products
2009 Inground Spas
LTR20091002, Rev. B
Clear Water Plan
www.calspas.com
29
Maintenance Schedule
Each time you rell the spa
Follow the section “Starting the Spa with Fresh Water”.
Prior to each use Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a month Deep clean your spa’s lter. (Follow lter cleaning instruction at
beginning of Clear Water Plan)
Every two to four months Drain and clean your spa with “Multi-Purpose Cleaner”.
Polish the acrylic surface with “Fast Sheen”.
Clean and treat spa cover, pillows, and Cal Select cabinet (if
equipped) with “Cover Protector”.
Rell your spa, following the section “Starting the Spa with Fresh
Water”.
If you are using the Cal Clarity Automatic Bromine Generator Clear
Water Plan, add new sodium bromide to the water.
Once a year Replace lter cartridges if the pleats appear frayed.
If you use the Cal Zone Quest 2000 Ozonator, you will need to re-
place the ozone cartridge.
We recommend that your spa water be changed every 4 to 6 months. You may nd the need to change your
spa water more frequently with heavy use. When empty, your spa should be cleaned with a non-abrasive
cleaner, such as Cal Spas™ All Surface Cleaner, and then rinsed thoroughly.