Filter
Top Products
SKU 90317 PAGE 4
3. Attach the Seat Back Assembly (#4) to the brackets on the Cast Iron Ends (#2) with hardware
Bolts (#3) (on front of Bench) and Nut (#3) (on back of Bench). Repeat on opposite end of
Bench. See Figure 4 & 5.
4. Tighten Nuts (#3) after assembling the Side Brackets. Tighten ALL the hardware at this time.
Test the Park Bench before using. Park Bench should sit firmly on a flat level surface.
#3
#4
Figure 4
2. Attach the Seat Support Bracket (#5) to the center underside of the Seat Slats (#1) with the
Wood Screws (#6). Tighten self tapping Wood Screws. See Figure 3.
#3
#3
#3
#2
#4
Figure 5
(View from Underneath Bench)
Figure 3
#5
Seat Support
Bracket
#6
Wood
Screws
#1
#2
Bracket