Bushnell 950007 Weather Radio User Manual


 
2
Once you have provided power to the unit and set your location,
you’re done with the setup-that’s all you need to do! Your
WeatherFX
will start to display weather information for your
area once it automatically connects to the network that relays the
data from AccuWeather. You will typically see most (or all) of your
area’s weather information appear on the display within the rst 15
minutes, however the time it takes for the display to show all of the
data on the larger models may take longer (up to a few hours after
it is rst powered on), and can vary depending on your location, so
please be patient.
After it receives the rst full set of all data, your
WeatherFX
will
continuously display weather information-updating temperature,
forecast and other data automatically as it becomes available. If
you seem to be having trouble receiving weather data, check the
Signal Strength Indicator bars to the right of “ambient” in the top
right corner of the display. If your unit only shows one bar, move it
closer to a window or try placing the unit in a higher level of your
home or building if possible. Two or more bars of signal strength
will ensure your
WeatherFX
stays up to date, and will improve
battery life, since it doesn’t have to “work as hard” to receive the
network signal.
Basic Setup (all models)
Basic Setup (all models)
Weather FX-All Models 1LIM-rev2.2 2 8/3/07 8:53:06 AM