Filter
Top Products
Figure 2-6
11
Cylinder Mounting Bushing
2-3 DISMOUNTING LOADER
Dismount loader on firm, level ground to facilitate
the next mounting. It is recommended that loader be
stored in a dry place to prevent rusting.
A. Observe the position of boom cylinder mount-
ing bushing in relation to the subframe. (Figure 2-6)
Remember this position to aid in aligning cross tube
with front bracket when loader is being mounted to
tractor.
B. Remove parking stands from storage. Raise
boom and install as shown in Figure 2-7.
Figure 2-7
Parking Stands Installed
Stands Pinned Into Place
DO NOT STAND UNDER LOADER WHILE
REMOVING/INSTALLING PARKING STANDS.
WARNING