Filter
Top Products
25 Series Rotary Tiller
6
How to Install Safety signs:
* Be sure that the installation area is clean and dry.
* Decide on the exact position before you remove the backing paper.
* Remove the smallest portion of the split backing paper.
* Align the safety sign over the specified area and carefully press the small portion
with the exposed sticky backing in place.
* Slowly peel back the remaining paper and carefully smooth the remaining portion
of the safety sign in place.
* Small air pockets can be pierced with a pin and smoothed out using the piece of
safety sign backing paper.
SAFETY SIGN LOCATIONS
The types of safety signs and locations on the equipment are shown in the illustrations
below. Good safety requires that you familiarize yourself with the various Safety Signs,
the type of warning and the area, or particular function related to that area, that requires
your SAFETY AWARENESS.
* Think SAFETY! Work SAFELY!