Buhler FK368 Lawn Mower User Manual


 
Power Mover
2
INTRODUCTION
The Buhler Farm King 2 wheel power mover allows you to move your Backsaver hopper
back and forth with fingertip control. It includes many features such as easy access ports
for servicing.
Keep this manual handy for frequent reference. All new operators or owners must review
the manual before using the equipment and at least annually thereafter. Contact your
Buhler Dealer if you need assistance, information, or additional copies of the manual. Visit
our website at www.buhler.com for a complete list of dealers in your area.
The directions left, right, front and rear, as mentioned throughout this manual, are as seen
facing in the direction of travel of the implement.
SAFETY
Remember, YOU are the key to safety. Good safety practices not only protect you, but
also the people around you. Make these practices a working part of your safety program.
Be certain that everyone operating this equipment is familiar with the recommended
operating and maintenance procedures and follows all the safety precautions. Most
accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and
identifies hazards. Follow the recommended precautions.
The safety alert symbol means…
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTION
The caution symbol indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNING
The Warning Symbol indicates a potentially hazardous situation that, if not avoided, could
result in death or serious injury, and includes hazards that are exposed when guards are
removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will
result in death or serious injury. This signal word is to be limited to the most extreme
situations, typically for machine components that, for functional purposes, cannot be
guarded.