Filter
Top Products
Land Rake
4
STORAGE SAFETY
Store the unit in an area away from human activity.
Do not permit children to play on or around the stored machine.
Support the frame on stands and blocks to provide a secure base.
SAFETY SIGNS
The following illustration shows the approximate location and detail of safety signs.
Keep all safety signs clean and legible and replace any that are damaged or missing.
When original parts are replaced, any safety signs affixed to those parts should be
replaced as well. Replacement safety signs are available from your local dealer.
INSTALLATION
To install safety signs, ensure the installation area is clean and dry. Decide on the
exact position before you remove the backing paper. Remove the smallest portion of
the split backing paper and align over the specified area. Carefully press in place.
Slowly peel back the remaining paper and smooth the remaining portion in place. Small
air pockets can be pierced with a pin and smoothed out.
ASSEMBLY
1. Assemble the hitch (#1) and hitch brace (#2) on the t-frame using
hardware supplied as shown in drawing.
2. The land rake frame is mounted on the t-frame with a
1” x 5” bolt (#17) on which the frame turns. The turntable
pin (#8) locks the rake in place at the desired angle.