Filter
Top Products
SECTION 5 - SPECIFICATIONS
5-19
3-POINT HITCH (Optional)
Linkage Category IV N / III.....................................................................
Maximum lift capacity @ 610 mm (24″) behind lower links 5897 kg (13,000 lbs.)......................
Cylinder
Diameter 104.6 mm (4″)....................................................................
Stroke 330.2 mm (13″).....................................................................
Drawbar 3-position swinging..................................................................
Maximum drawbar offset 214 mm (8.4″).........................................................
DRAWBAR
Hitch pin
Standard 2290, 2335, 2360, 2375 - 38 mm (1-1/2″) Class 4 - 51mm (2″) optional..................
2425 - 51 mm (2″) Class 4 - 38 mm (1-1/2″) optional
Type one-piece 5-position w/ replaceable wear block..............................................
(3-point hitch - 3-position)
Clevis bolt-on w/ safety latch...................................................................
bolt-on bottom lowers hitch point 90 mm (3.5″)
Clevis throat opening 90 mm (3.5″).............................................................
Height to top of drawbar 419 to 522 mm (16.5″ to 20.6″) (depending on tire size)......................
Maximum offset 366 mm (14.4″)................................................................
BRAKES
Type single dry disc...........................................................................
Disc diameter 508 mm (20″)...................................................................
Disc thickness 19 mm (0.75″)..................................................................
Service brake hydraulic-actuated foot pedal......................................................
Park brake cable-operated mechanically-actuated................................................
Caliper single w/dual pads.....................................................................
STEERING
Pump open center gear pump..................................................................
Maximum pressure 17.2 bar (2500 PSI).........................................................
Flow at rated engine speed
2290, 2335, 2375 102 L/min (27 GPM).......................................................
2360, 2425 114 L/min (30 GPM).............................................................
Cylinder diameter 89 mm(3.5 ″ )................................................................
Cylinder stroke
419 mm (16.5″).................................................................
Maximum articulation angle (no blocks) 42°......................................................
Steering column
Tilt 45°...................................................................................
Telescope 100 mm (3.88″)..................................................................
Steering wheel
Diameter 406 mm (16″)....................................................................
Turning effort ( engine idle) 1.7 N⋅m (1.25 ft. lbs.)...............................................