Buhler FK332 Snow Blower User Manual


 
108” Allied Snowblower
SNOWBLOWERS
This manual is for model #1080 snowblowers with a combination three point and quick
coupler hitch. All model #1080 snowblowers use an open gear drive. The standard
model is a push type which will mount to a tractor with 1000 rpm PTO only. This model
uses a chain drive reducer in the welded gearbox assembly which runs in an oil bath. A
direct drive 540 rpm model is also available. It is supplied with category 2 pins as well
as conversion bushings to category 3. This 108" wide snowblower comes with a
hydraulic chute control as standard. A hand crank is not available. There is a shear
bolt on the auger and two on the PTO shaft to protect the machine from damage if a
large object is picked up. Any smaller objects in the snow will be thrown with it and
could cause serious injury. Do not let anyone stand behind the tractor in the area of the
discharged snow.
2
Replace safety signs immediately
should they become damaged, torn or
illegible. Obtain replacements from your
authorized dealer using the part
numbers shown.
#1
#2 #3