Filter
Top Products
L-1914 Rev. B
7.
Figure 1.
INSTALL CLEVIS
1a. Install Clevis (33) to the Tow-
bar (34).
1b. Install Hitch Pin (44) and
secure with Hairpin Cotter. (48).
2a. Remove the Tank Cap (2).
2b. Attach the Wand Holder Clip
(3) to the Sprayer Tank (1) using
the #10-14 x 3/8 inch screw (29),
as shown.
2c. Attach the mesh Strainer (13)
by reaching into the tank (1) and
screwing the strainer to the 1/4
inch adapter (12) on the end of
the suction hose (18).
Note:The suction hose (18) is
already attached to the
pump.
ATTACH WAND HOLDER CLIP
Figure 2.
33
48
44
47
34
45
3
1
29
29
Screw, #10-24 x 3/8”
Qty. 1
48
Hairpin Cotter
Qty. 1
45
Whiz Lock Nut, 5/16”
Qty. 2
47
Hex Flange Bolt, 5/16” x 5/8”
Qty. 2
44
Hitch Pin
Qty. 1
13
2
12
18
4
ASSEMBLY