Filter
Top Products
4
Deck/Wall/Fence
Mounting:
Select a location with full, direct sunlight.
Shady locations will not allow the battery to
charge fully and will reduce the hours of
nighttime light.
Step 1
Mount the bracket to a deck, wall or
fence using the two screws provided.
Step 2
Insert the hexagon portion of the
connector to the bottom hexagon hole
of the light fixture.
Step 3
Insert light fixture with connector into
bracket. The photocell light sensor
should point away from other nighttime
light sources.
Step 4
Charge in direct sunlight for 10-12
FULL, SUNNY DAYS. The light will turn
on automatically at night. Allow at least
10-12 cycles (i.e., 10-12 days and nights
of charging and discharging) for the
battery to charge to its full capacity.
INSTR_Legacy II 2/4/02 10:49 AM Page 8