Filter
Top Products
Step 1
Attach the ground stake to a pointed
connector. Push approximately 3" of the
ground stake into the ground.
NOTE: Ground can be softened by soaking
area with water first.
Step 2
Insert light head into ground stake. The
photocell light sensor should point
away from other nighttime light
sources.
Step 3
For optimum performance, it is best to
charge the solar light for a FULL,
SUNNY DAY. The light will turn on
automatically at night. The Ni-Cd
rechargeable battery provides increased
brightness and stays on longer as it
cycles over time (days and nights of
charging and discharging). The more
direct sunlight that the light receives
during the day, the brighter and longer
the light will stay on at night.
OPERATING INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
3
Assembly
INSTR-minipost-stake.qxd 1/8/04 3:16 PM Page 4