Filter
Top Products
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental
factors.
ENGINE:
33 HP* Caterpillar
Make Caterpillar
Model 3013E
Horsepower 33 @ 3600 rpm
Displacement 91.54 Cu. in (1500 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 500
CCA
Oil Capacity 11.5 Pt. (5.4 L) w/ Filter
CHASSIS:
Fuel Tanks Capacity: 13 Gallons (49.2 L) Total
Rear Wheels Tire Size: 26 x 12.00 -12
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 13 x 6.50 - 6
Inflation Pressure: 25 psi (1,72 bar)
TRANSMISSIONS:
HydroGear BDP-21 / Parker TF-040
Type Pump and Wheel Motor
Hydraulic Fluid Mobil 1™ 15W-50 synthetic oil or
Castrol Syntec™ 5W-50 oil
Speeds Forward: 0-11 MPH (0-17.7 km/h)
@ 3400 rpm Reverse: 0-5 MPH (0-9.65 km/h)
Continuous Torque 483 ft. lbs. (654 N.m.)
Output
Maximum Weight 3000 lbs. (1360 Kg)
on Axle
DIMENSIONS:
Overall Length 87” (221 cm)
Overall Width
72” Side Discharge 85” (216 cm)
72” Rear Discharge 73” (185 cm)
61” Side Discharge 62” (157 cm)
Height 55” (140 cm)
Weight (apx.)
w/ 72” Deck 1908 lbs. (865 kg)
w/ 61” Deck 1887 lbs. (856 kg)
Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be
lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given
both the wide array of products on which engines are placed, and the variety of environmental issues applicable
to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors including, but
not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.
Specifications
www.ferrisindustries.com
52
Specifications