Briggs & Stratton 5900640 Lawn Mower User Manual


 
42
www.ferrisindustries.com
Specifications
ENGINE:
24 HP Briggs & Stratton
Make Briggs & Stratton
Model 44M7770113E1
Horsepower 24 @ 3500 rpm
Displacement 44.2 Cu. in (725 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 340
CCA
Oil Capacity 4 US pt. ( 1.9L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 6 Gallons (22.7 L)
Rear Wheels Tire Size: 20 x 8.00 -10
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00 - 5
Inflation Pressure: 40 psi (2,76 bar)
TRANSMISSIONS:
HydroGear PG-3H / HGM-12C
Type Pump and Wheel Motor
Hydraulic Fluid SAE 20W-50 motor oil
Speeds Forward: 0-8 MPH (0-12.87 km/h)
@ 3400 rpm Reverse: 0-4 MPH (0-6.44 km/h)
Continuous Torque 222 ft. lbs. (301 N.m.)
Output
Maximum Weight 750 lbs. (340 Kg)
on Axle
DIMENSIONS:
Overall Length 79” (201 cm)
Overall Width 61” (155 cm)
Height 65” (165 cm)
Weight (apx..) 945 lbs. (429 kg)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
Specifications
Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be
lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given
both the wide array of products on which engines are placed, and the variety of environmental issues applicable
to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors including, but
not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.
Specifications