Filter
Top Products
MAINTENANCE
24
To Clean the Generator
• Use a damp cloth to wipe exterior surfaces clean.
• Use a soft, bristle brush to loosen caked on dirt, oil, etc.
• Use a vacuum cleaner to pick up loose dirt and debris.
• Inspect cooling air slots and openings on the generator.
These openings must be kept clean and unobstructed.
When Calling the Factory
You must have the following information at hand if it is
necessary to contact a local service center regarding service
or repair of this unit:
1. Obtain unit Model Number and Serial Number from unit
data decal. See “Know Your Home Standby Generator”
diagram for location.
2. Obtain engine Model/Type/Code numbers from engine
label. See “Know Your Home Standby Generator”
diagram for location. Please note that model number
may vary slightly from that presented herein.
STORAGE
The Briggs & Stratton Home Standby Generator is designed
for continuous backup operational duty. As such, there is no
need to take any storage precautions. However, if it becomes
necessary to take the system out of service for an extended
period, call Briggs & Stratton Technical Services at
1-800-743-4115, between 8:00 AM and 5:00 PM CT for
specific recommendations.
NOTICE
Improper treatment of generator can damage it and
shorten its life.
• DO NOT expose generator to excessive moisture, dust, dirt, or
corrosive vapors.
• DO NOT insert any objects through cooling slots.