Briggs & Stratton 1687228 Snow Blower User Manual


  Open as PDF
of 4
 
3
Gear Case Kit Installation Instructions
Assemble Housing
1. Install the side covers (A, Figure 4) and secure with
the original hardware.
2. Reinstall the bearings (C), washers, and retaining
rings (D) in both side covers.
Fill Auger Gear Case Oil
1. Remove the fill plug (Figure 5). Fill the gear box with
The Dealer Line Winter Weight Worm Gear Oil until
the oil level reaches the bottom of the fill hole.
Figure 5. Checking Auger Gear Case Lubrication
Pipe Plug
Figure 4. Assemble Housing
A. Side Cover
B. Housing
C. Bearing
D. Washers & Retaining Ring
A
B
C
D
 previous