Filter
Top Products
FEATURES AND CONTROLS
5
KNOW YOUR GENERATOR
Read this operator’s manual and safety rules before operating your generator.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Choke Lever
120 Volt AC, 20 Amp
Duplex Receptacles
On/Off Switch
Spark Arrester Muffler
Grounding Fastener
Air Cleaner
Fuel Tank
Oil Fill Cap/Dipstick
Data Tag
Circuit Breakers (AC)
120 Volt AC, 20 Amp Duplex Receptacles — May be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical lighting,
appliance, tool and motor loads.
Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Push to reset circuit breakers
are provided to protect the generator against electrical
overload.
Data Tag – Provides model, revision and serial number of
generator. Please have these readily available if calling for
assistance.
Fuel Tank — Capacity of four (4) U.S. gallons.
Fuel Valve — Used to turn fuel supply on and off to engine.
Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
Oil Drain Plug — Remove to drain engine oil.
Oil Fill Cap/Dipstick — Check and add oil to engine
here.
Recoil Starter — Used to start the engine manually.
On/Off Switch — Set this switch to "On" before starting
engine. Set switch to "Off" to switch off engine.
Spark Arrester Muffler — Exhaust muffler lowers engine
noise and is equipped with a spark arrester screen.
Recoil Starter
Fuel Valve
Oil Drain Plug