Bounty Hunter FAST Metal Detector User Manual


 
4
BATTERIES
Use ALKALINE batteries only.
Follow these steps to install the batteries.
1 Carefully remove the battery compartment door by pressing
the release clip on the right side of the door.
2 Snap one battery on to each of the terminals and place the
batteries inside the compartment.
The battery compartment is a tight fit. Insert one battery
with the terminals facing down, and the second battery with
the terminals facing outward. See illustration.
3
Replace the compartment door by first inserting the hinge on
the side opposite of the release clip.
4
Then, press down firmly on the clip side until the battery door
snaps into place.
First Battery
Second Battery
First Battery
terminals facing in
Second Battery
terminals
facing out
Release
Clip