Bolens BL150 Trimmer User Manual


 
RULES FOR SAFE OPERATION
Read the Operator’s Manual and follow all warnings and safety
instructions. Failure to do so can result in serious injury to the operator
and/or bystanders.
FOR QUESTIONS, CALL 1-800-800-7310 IN U.S. OR
1-800-668-1238 in CANADA
WARNING:
Failure to obey a safety warning can
result in injury to yourself and others. Always follow the
safety precautions to reduce the risk of fire, electric
shock and personal injury.
CAUTION:
Failure to obey a safety warning may result
in property damage or personal injury to yourself or to
others. Always follow the safety precautions to reduce
the risk of fire, electric shock and personal injury.
READ ALL INSTRUCTIONS BEFORE OPERATING
Read the instructions carefully. Be familiar with the controls and
proper use of the unit.
Do not operate this unit when tired, ill or under the influence of
alcohol, drugs or medication.
Children under the age of 15 must not use the unit; teens may
operate the unit with adult guidance.
Inspect the unit before use. Replace damaged parts. Check for fuel
leaks. Make sure all fasteners are in place and secure. Replace cutting
attachment parts that are cracked, chipped or damaged in any way.
Make sure the cutting attachment is properly installed and securely
fastened. Be sure that the cutting attachment shield is properly attached,
and positioned as recommended. Failure to do so can result in personal
injury to the operator and bystanders, as well as damage to the unit.
Use only 0.080 inch (2.03 mm) diameter original equipment
manufacturer replacement line. Never use metal-reinforced line, wire,
chain or rope. These can break off and become dangerous projectiles.
Be aware of risk of injury to the head, hands and feet.
Clear the area to be cut before each use. Remove rocks, broken glass,
nails, wire, string and other objects which may be thrown or become
entangled in the cutting attachment. Clear the area of children, bystanders
and pets; keep them outside a 50-foot (15 m.) radius, at a minimum. Even
then, they are still at risk from thrown objects. Encourage bystanders to
wear eye protection. If you are approached, stop the unit immediately.
Squeeze the throttle control and check that it returns automatically to
the idle position. Make all adjustments or repairs before using the unit.
This unit was not designed to be used as a brushcutter. Do not
attach or operate this unit with any type of brushcutting blade or
brushcutting attachment.
WARNING:
When using the unit, you must follow the
safety rules. Please read these instructions before operating
the unit in order to ensure the safety of the operator and any
bystanders. Please keep these instructions for later use.
• IMPORTANT SAFETY INSTRUCTIONS •
SAFETY WARNINGS FOR GAS TRIMMERS
Store fuel only in containers specifically designed and approved
for the storage of such materials.
Always stop the engine and allow it to cool before filling the fuel tank.
Never remove the fuel tank cap or add fuel when the engine is hot.
Never operate the unit without the fuel cap securely in place. Loosen
the fuel tank cap slowly to relieve any pressure in the tank.
Add fuel in a clean, well-ventilated outdoor area where there are
no sparks or flames. Remove the fuel cap slowly, and only after
the engine stops. Do not smoke while fueling or mixing fuel. Wipe
up any spilled fuel from the unit immediately.
Avoid creating a source of ignition for spilled fuel. Do not start the
engine until fuel vapors dissipate.
Move the unit at least 30 feet (9.1 m) from the fueling source and site
before starting the engine. Do not smoke. Keep sparks and open
flames away from the area while adding fuel or operating the unit.
WHILE OPERATING
Never start or run the unit inside a closed room or building.
Breathing exhaust fumes can be fatal. Operate this unit only in a
well-ventilated outdoor area.
Wear safety glasses or goggles that meet ANSI Z87.1 standards and
are marked as such. Wear ear/hearing protection when operating
this unit. Wear a face or dust mask if the operation is dusty.
Wear heavy long pants, boots, gloves and a long sleeve shirt. Do
not wear loose clothing, jewelry, short pants, sandals or go
barefoot. Secure hair above shoulder level.
The cutting attachment shield must always be in place while
operating the unit. Do not operate unit without both trimming
lines extended, and the proper line installed. Do not extend the
trimming line beyond the length of the shield.
This unit does not have a clutch. The cutting attachment
continues rotating when the engine is idling. If it does not, have
the unit adjusted by an authorized service technician.
Adjust the D-handle to your size in order to provide the best grip.
Be sure the cutting attachment is not in contact with anything
before starting the unit.
Use the unit only in daylight or good artificial light.
Avoid accidental starting. Be in the starting position whenever
pulling the starter rope. The operator and unit must be in a stable
position while starting. Refer to Starting/Stopping Instructions.
Use the right tool. Only use this tool for its intended purpose.
Do not overreach. Always keep proper footing and balance.
Always hold the unit with both hands when operating. Keep a firm
grip on both handles or grips.
Keep hands, face, and feet at a distance from all moving parts. Do
not touch or try to stop the cutting attachment when it rotates.
Do not touch the engine, gear housing or muffler. These parts get
extremely hot from operation, even after the unit is turned off.
Do not operate the engine faster than the speed needed to cut, trim
or edge. Do not run the engine at high speed when not cutting.
Always stop the engine when cutting is delayed or when walking
from one cutting location to another.
If you strike or become entangled with a foreign object, stop the engine
immediately and check for damage. Do not operate before repairing
damage. Do not operate the unit with loose or damaged parts.
Stop the unit, switch the engine to off, and disconnect the spark
plug for maintenance or repair.
Use only original equipment manufacturer replacement parts and
accessories for this unit. These are available from your authorized service
dealer. Use of any unauthorized parts or accessories could lead to
serious injury to the user, or damage to the unit, and void your warranty.
Keep unit clean of vegetation and other materials. They may
become lodged between the cutting attachment and shield.
WARNING:
Gasoline is highly flammable, and its vapors
can explode if ignited. Take the following precautions:
2
The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols, and their explanations, deserve your
careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they
give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
SAFETY ALERT:
Indicates danger, warning or
caution. Attention is required in order to avoid serious
personal injury. May be used in conjunction with other
symbols or pictographs.
NOTE: Advises you of information or instructions vital to the
operation or maintenance of the equipment.
DANGER:
Failure to obey a safety warning will result
in serious injury to yourself or to others. Always follow
the safety precautions to reduce the risk of fire, electric
shock and personal injury.