7
ENGLISH
• Maintenance and/or repair of electrical
components must be carried out by qualified staff.
Accident hazard
• DISCHARGE residual pressure before
disconnecting the unit hose. Injury hazard
• Before using the appliance, CHECK every time that
the screws are fully tightened and that there are no
broken or worn parts. Accident hazard
• Only use detergents which will not
corrode the coating materials of the high pressure
hose/electrical cable. Explosion and electric shock
hazard
• Ensure that all people or animals keep a
minimum distance of 16 yd. (15m) away. Injury hazard
General information (fig.1)
Use of the manual
This manual forms an integral part of the appliance and
should be kept for future reference. Please read it carefully
before installing/ using the unit. If the appliance is sold, the
Seller must pass on this manual to the new owner along
with the appliance.
Delivery
The appliance is delivered partially assembled in a
cardboard box. The supply package is illustrated in fig.1.
Documentation supplied with the appliance
• A1 Use and maintenance manual
• A2 Safety instructions
• A3 Declaration of conformity
• A4 Warranty regulations
Disposing of packaging
The packaging materials are not environmental pollutants
but must still be recycled or disposed of in compliance with
the relevant legislation in the country of use.
Safety signs
Comply with the instructions provided by the safety signs
fitted to the appliance.
Check that they are present and legible; otherwise, fit
replacements in the original positions.
E1 sign – Indicates that the appliance must not be disposed
of as municipal waste; it may be handed in to the dealer on
purchase of a new appliance. The appliance's electrical and
electronic parts must not be reused for improper uses since
they contain substances which constitute health hazards.
Symbols
E2 symbol – Indicates that the appliance is intended
for professional use, i.e. for experienced people informed
about the relative technical, regulatory and legislative
aspects and capable of performing the operations necessary
for the use and maintenance of the appliance.
E3 symbol – Indicates that the appliance is intended
for non-professional (domestic) use.
Technical information (fig.1)
Envisaged use
This appliance has been designed for individual use for the
cleaning of vehicles, machines, boats, masonry, etc, to
remove stubborn dirt using clean water and biodegradable
chemical detergents. Vehicle engines may be washed only if
the dirty water is disposed of as per regulations in force.
• Intake water temperature: see data plate on the
appliance.
• Intake water pressure: min. 0,1MPa-max 1MPa.
• Operating ambient temperature: above 0°C.
• The appliance is compliant with the EN 60335-2-79/A1
standard.
Operator
The symbol on the front cover identifies the appliance’s
intended operator (professional or non-professional).
Improper use
• Use by unskilled persons or those who have not read
and understood the instructions in the manual is
forbidden.
• The introduction of inflammable, explosive and toxic
liquids into the appliance is prohibited.
• Use of the appliance in a potentially inflammable or
explosive atmosphere is forbidden.
• The use of non-original spare parts and any other spare
parts not specifically intended for the model in question is
prohibited.