Black & Decker PF260 Yard Vacuum User Manual


  Open as PDF
of 32
 
8
OPeRatiOn
WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses.
WARNING:
Severe abrasion hazard. Always hold tool rmly with one hand
on the switch handle and the other hand on the secondary handle (3) as shown
in Figure F. Never operate the Powerle in an inverted stationary position.
 
 
VARIABLE SPEED CONTROL (FIG. G)
The variable speed control allows you to adapt the speed of the tool to the workpiece material.
 
and when removing painted or varnished surfaces. Use a high speed setting when
using a coarse grit and when removing a lot of material.
 
SWITCHING ON AND OFF (FIG. H)
WARNING:
Before plugging in the tool, always check to see that the switch
trigger activates properly and returns to the “off” position when released and
that either the dustbag (for non-metallic material) or the deector (for metallic
material) is in place on the exhaust opening.
 
 
For continuous operation:
- Press the on/off switch (1).
- Press the lock-on button (2).
- Release the on/off switch.
 
DUST COLLECTION
WARNING:
To prevent accidental operation, turn off and unplug sander
before installing the dust bag (8) or deector (9).
WARNING:
Fire hazard. Collected sanding dust from sanding surface
coatings (polyurethane, linseed oil, etc.) can self-ignite in sander dust bag or
elsewhere and cause re. To reduce risk, empty bag frequently and strictly follow
sander manual and coating manufacturer’s instructions.
WARNING:
Fire hazard. When sanding wood that could contain nails or when
sanding metal surfaces, do not use the dust bag (8) or a vacuum cleaner because
sparks are generated. Instead attach the deector (9) with the open area facing
away from your body. Wear safety glasses and a dust mask. Due to the danger of fire,
do not use your sander to sand magnesium surfaces. Do not use for wet sanding.
EMPTYING THE DUSTBAG (FIG. E)
The dustbag should be emptied every 10 minutes of use.
 
 
 
If necessary, the dustbag can be removed from its frame and washed. Let it dry before refitting it.
APPLICATIONS
Straight arm (g. I)
 
HINTS FOR OPTIMUM USE
 
 
 
 
 
off until after it has been lifted from the workpiece.
 previous next