Filter
Top Products
5
ENGLISH
5. Service
a. Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Safety Instructions
for Blowers
• Do not collect still smoldering cigarette
ashes, freshly cut metals shaving, screws,
nails and the like.
• Never block suction inlet and outlet.
Warning symbols
Read the operation manual and
follow all warnings and safety
instructions.
Do not use your saw in wet
conditions or expose it to rain.
Always wear eye protection.
Always wear ear protection.
Beware of falling objects.
Keep bystanders away.
Do not touch the fan.
Electrical safety
This tool is double insulated; therefore
no earth wire is required. Always
check that the power supply corresponds to the
voltage on the rating plate.
Features
This tool includes the following features:
1. Nozzle
2. Blast Port
3. Trigger Switch
4. Variable Speed Knob
5. Lock-On Button
6. Suction Port
7. Dust Bag
Assembly
Warning! Before assembly, make sure that the
tool is switched off and unplug.
Use
Mounting The Nozzle For
Blowing Operations (fig. A)
• Insert the pin located inside the Nozzle into
the notch provided on the Blast Port (1)
• To lock Nozzle in place, turn the Nozzle in the
direction indicated.
• To remove Nozzle, turn the Nozzle in the
opposite direction.
Mounting The Nozzle And Dust
For DustCollection (fig. B)
• For dust collection, mount the Dust Bag at the
Blast Port (2) and Nozzle at the Suction Port
(6)
• To remove Dust Bag and Nozzle, simply pull
out by first turning in the opposite direction.
• Empty the Dust Bag frequently to ensure
maximum dust collecting efficiency.
Operating The Blower (fig. C)
• To switch your Blower on, depress the Switch
(3). To stop your Blower, release Switch.