Filter
Top Products
15
4.2.3 O
PERATION
To start work on the NetWare
workstation, run the STARTNET
batch file. Then log into the
network.
The STARTNET.BAT file includes
the following set of commands:
LSL
SETODI
IPXODI
NETX
F:
If you wish, you may enter these
commands in the AUTOEXEC.BAT
file in the order shown.
To unload the ODI workstation
software, unload the programs in
reverse order using the U switch:
NETX u
IPXODI u
SETODI u
LSL u
4.3 Microsoft LAN Manager
4.3.1 I
NSTALLATION FOR
M
ICROSOFT
LAN M
ANAGER
(
VERSIONS
2.1
AND
L
ATER
)
FOR
DOS
AND
OS/2 (NDIS
D
RIVER
)
1. Begin installation of LAN
Manager using “setup.”
2. When prompted to select the
available network adapter driver,
choose “Other Driver.”
CHAPTER 4: Software Setup and Operation
• EPP—The adapter supports the
Enhanced Parallel Port (EPP).
Most PCs based on the Intel
80386SL or 80486SL chipsets
may be configured to work in
the EPP mode. This mode
improves the performance of the
adapter and therefore is
recommended if the PC
supports it.
IMPORTANT!
Be sure that your PC has
EPP capability before
selecting this mode.
• FRAME—The ODI driver
supports multiple frame types.
Certain NOS, such as NetWare
1.X through 3.11, use frame
ETHERNET_802.3, while others
use ETHERNET_802.2 as default
frame type. The SETPODI
default frame type is
ETHERNET_802.3.
• DISABLELINK—When used with
non-10BASE-T Unshielded
Twisted-Pair networks like
Starlan 10, Link Integrity should
be disabled. Without the
“DISABLELINK” keyword, the
driver defaults to link integrity
ENABLED.