Filter
Top Products
17
4. Operation
Once connected, the CAT5 Audio/Video System broadcasts to all monitors/
speakers.
4.1 The Control Unit
The control unit, which is included with the 8-Port Broadcaster, is shown below.
Figure 4-1. Control unit.
With the control unit, you can carry out the following functions: Master to all or
Dark all.
4.1.1 B
ROADCAST TO
A
LL
Press the Broadcast to all button to send the Broadcaster’s screen with audio to all
remote monitors/speakers. The LED above the button will light.
Press the button again to release the remote screens.
4.1.2 D
ARK
A
LL
Press the Dark all button to darken all remote screens. The LED above the button
will light. (This does not affect audio broadcasting.)
Press the button again to release the remote screens.
4.2 Adjusting the Picture Quality
To adjust the picture quality, use a small screwdriver to turn the Picture adjuster on
the Remote unit. (See Figure 3-3 in Chapter 3.)
CHAPTER 4: Operation
To Broadcaster
unit’s control port
Broadcast
to all