Filter
Top Products
Page 10
724-746-5500 | blackbox.com
AVU4001A
Chapter 3: Connecting Your Wizard Multimedia Extender LP
3. Connecting Your Wizard Multimedia Extender LP
Local unit:
1. Connect the HD15 VGA video plug to the video card in the host computer.
2. Connect the USB Type A connector to a vacant USB port on the computer.
NOTE: The USB connection only provides power for the units.
3. Connect the RJ-45 plug to the video interconnect cable.
Remote unit:
1. Connect the HD15 VGA video plug to the socket on the display screen.
2. Attach the other end of the RJ-45 interconnect cable to RJ-45 socket on the
unit.
IMPORTANT NOTES:
1. Screened (FTP) cable is preferred to connect the two units. For cable runs
greater than 50 m, low-skew cable may also be required to avoid color fringing
efffects within the video image.
2. Do not connect the local unit via CATx cable to anything other than the remote
unit.