Filter
Top Products
Part No 440021 Form No F101706A
11
FORCE BLOWER Owner’s Manual
ADJUSTING AIR DIRECTOR
To adjust air direction, first loosen knob and then position air director cone to desired angle. When the cone is at a
suitable position tighten knob to secure. DO NOT position director cone to where it will blow debris towards people,
vehicles or other objects in vicinity. Flying debris may damage, harm, or cause injury to people or objects in air flow
range.
FRONT DIVERTER POSITIONING
The removable front diverter adapter can be slipped on to direct the air stream forward. First turn off engine, and then
simply slide diverter onto cone following guide points and twist till locked in position. This option is extremely useful for
cleaning out long cracks in pavement or for cleaning under bushes, building overhangs or along curbs.
WARNING: Unit will be hard to handle and be pushed backward by the force of the air pushing against the unit. Keep
hands on the unit at all times when using the front diverter. To reduce resistance when attaching the diverter, use a
silicone lubricant spray on the locking grooves. This should allow the diverter to slide into position with more ease.
Adjustment knob
Front diverter