Filter
Top Products
Part No 891013 Form No F072508A
8
KV Push Owner’s Manual
PACKING CHECKLIST
Your Billy Goat KV Vacuum is shipped from the factory in one carton, completely assembled except for the
upper handle, debris bag, and bag quick disconnect.
PUT OIL IN ENGINE BEFORE STARTING
ASSEMBLY
READ all safety instructions before assembling unit.
TAKE CAUTION
when removing the unit from the box the Handle Assembly is attached by
cables and folded over
1. ASSEMBLE Lift upper handle (item 11), remove items 34, 32, and 33 from lower handle (item 10). Attach and
secure upper handle as shown using same hardware. Then use the two ty-wraps to secure the height adjust cable
and the throttle cable at the bend on the upper handle
2. UNFOLD the debris bag (item 21) and fasten bag neck to bag quick disconnect (item 12). Attach firmly to
housing exhaust (item 1) see fig. 2.
3. ATTACH bag hanger strap to bag supports (item 13), preassembled to upper handle.
4. CONNECT spark plug wire.
Boxing Parts
Checklist
Debris Bag
P/N-891132
Literature Assy
P/N-891123
Connector Quick
Disconnect
P/N-890176
Honda 6.5
GSV 190
Briggs & Stratton
6.0 HP Quantum
PARTS BAG &
LITERATURE ASSY
Warranty card P/N- 400972, Owner’s Manual P/N-891013, Declaration of Conformity P/N-891057, Ty-
Wraps 900407 (qty2).
Quick disconnect
Fig. 2
Use Ty-wraps
here