Filter
Top Products
Part No 440133 - 2 - Form No F051206A
440120 HOLD DOWN KIT
THANK YOU for purchasing a BILLY GOAT
®
FORCE Hold Down kit. This kit has been carefully
designed and manufactured to provide years of reliable and productive service. This manual
provides mounting instructions, and directions to secure your FORCE Blower in transport and to
keep your unit in top running order. Read this manual carefully before assembling.
ASSEMBLY
To use the Hold Down, simply rest the bolt mounted previously behind the tire in the slot area that the
pin will retract. Using your foot press the lever and lower the blower into the Hold Down unit gently unit
it rests at the bottom of the slot. To release simply reverse order used to Hold Down unit.
Hold Down kit will be pre assembled, insert the mounting bolt (item #3) with washer (item #6) through
the hole located behind the front tire on the frame, secure with the nut lock (item #4). Mount the Hold
Down to a trailer or bed by first measuring and marking the holes for the lag screws then drilling the
holes with a ¼” drill bit. Then secure the Hold Down with the lag screws (item #2), and washers (item
#5).
1
2
5
Parts List
Part No. Description Qty
1 440138 HOLD DOWN FORCE 1
2 520150 SCREW LAG 5/16X1.5" 4
3 8041235 BOLT 1/2-13X7" HCS ZP 1
4 8160005 NUT LOCK 1/2-13 HEX 1
5 8177011 WASHER LOCK 6/16" ST MED 4
6 8172011 WASHER FLAT 1/2" SAE ZP 1
440120 HOLD DOWN KI
T
1
3
4
6