Filter
Top Products
1. About the cooling circuit and cooling liquid
BLUE ANTIFREEZE
DILUTED 1,2 ETHANEDIOL
(1/3 ETHANEDIOL-2/3 DEMI WATER)
NOT FOR HOUSEHOLD USE
KEEP OUT OF REACH OF CHILDREN. HARMFUL
BY ORAL INTAKE. AVOID EXPOSURE TO
PREGNANT WOMEN. AVOID CONTACT WITH
EYES AND SKIN
BARCO KUURNE BELGIUM
1000ml
R821679
HARMFUL
Image 1-2
Safety label
Before opening the bottles with fresh cooling liquid, attentively read the safety instruction mentioned on the bottle label and listed
below.
Handling the cooling liquid
• Avoid contact of the liquid with Eyes, Skin and Clothing.
• Avoid inhale of the noxious fumes.
• Conserve the product in the original package and on a good ventilated room.
Personal protection rules
• Handle the cooling liquid in a good ventilated room.
• Under no circumstances eat, drink and smoke while handling the liquid.
• Wear gloves (Butylrubber, PVC....) and Goggles.
• Wear suitable protection clothing.
1.2 Preparation of the projector
What has to be done?
1. Switch Off the projector. (see owners or installation manual of the projector)
2. Removethesidecover.
3. Remove the lamp unit to access the cooling liquid In- and Outlet.
4. Remove the screw cap on the valve of the pressure vat and press the air release valve to release the expansion vat pressure.
Image 1-3
Expansion vat pressure release
5. It is advisable to fill the tube of the pump suction side with liquid prior to start-up. Proceed as follows:
2
R59770032 COOLING LIQUID REFILL 24/08/2006