Filter
Top Products
Chapter 3. Operation
15
Mute Commands
To enable or disable audio coming from the output port, use the following
commands.
The formula for the Mute commands are as follows:
Mute Command + Output Command + Port Number + Control [Enter]
For example, to turn mute on for port 04, type the following:
mute o04 on [Enter]
The following tables show the possible values and formats for the Output
Command, Port Number, and Control command:
The following table shows the available mute command list:
Command Description
mute Enable / Disable audio of the
output port
Output Command Description
o Output command
Port Number Description
yy 01-08 port (default is 01)
* All ports
Control Description
on Mute on; audio from output port
is disabled
off Mute off; audio output enabled
(default)
Command Output Port Control Enter Description
mute o yy on [Enter] Mute on (no audio)
mute o yy off [Enter] Mute off (audio on)
mute o * on [Enter] Mute on (no audio) all
ports
mute o * off [Enter] Mute off (audio on) all
ports