Filter
Top Products
Instruction Sheet
Kit Number: 59102100
© Copyright 2013 • Ariens Company • Brillion, WI 54110 04686600 5/13 Page 1 of 1
PRO-TURN CLUTCH SPACER KIT
Package Contents
Check contents of kit for parts listed below (figure 1).
Installation
1. Stop engine and wait for moving parts to stop and
hot parts to cool.
2. Remove belt from clutch pulley.
3. Remove 7/16 x 2-1/2" hex bolt and flat washer
retaining clutch to crankshaft. Dispose or bolt but
retain flat washer.
4. Remove and retain clutch.
5. Remove spacer below engine pulley and discard.
See Figure 2.
6. Clean out crankshaft threads using a 7/16-20 tap.
7. Apply a thin coat of anti-seize compound to the
engine crankshaft if none is present.
8. Install new spacer (item 1) below engine pulley. See
Figure 2.
9. Install clutch and flat washer and secure with
replacement hex bolt (item 2).
10. Tighten hex bolt and torque to 560 – 732 lbf-in.
11. Install PTO belt.
WARNING: FAILURE TO FOLLOW
INSTRUCTIONS could result in personal injury
and/or damage to unit.
Read, understand and follow all safety practices
in Owner/Operator Manual before beginning.
Item Description Qty Ariens P/N
1 1-1/8 x 1-3/4 x 1-1/16" Spacer 1 04519200
2 7/16-20 x 2-3/4" Hex Bolt 1 05900043
Figure 1
1
2
Figure 2
Flat Washer
1
2
Clutch
Engine Pulley