Filter
Top Products
GB - 13
OPTIONAL CONTROLS
Primer Bulb (911150, 151, 152, 153)
Push the primer bulb in to add fuel for easier
engine start.
Wheel Drive Control (self-propelled
models)
NOTE: Engine must be running for wheel
drive to propel unit.
911152, 153, 154
To drive forward:
Slowly squeeze the wheel drive control
toward the handlebar until you reach a
comfortable ground speed. Hold the wheel
drive control against the handlebar for full
speed.
To stop:
Release wheel drive control.
Speed Limiter (911152, 153, 154)
The speed limiter increases or decreases
tension in the drive cable, which limits the
unit’s forward speed.
In the operator’s position, turn the speed
limiter to the left to increase maximum
forward speed. Turn the speed limiter to the
right to decrease maximum forward speed.
Fuel Shutoff Valve (911154)
IMPORTANT: The fuel shutoff valve MUST
be in the closed position prior to transporting
the unit.
Open the fuel shutoff valve to operate the
unit. Close the fuel shutoff valve when
storing, transporting or servicing the unit.
Choke Control (911154)
Move choke lever to the choke position to
start a cold engine.
NOTE: The choke will slowly open as the
engine warms.
CAUTION: Unit will move forward
at engine start if wheel drive
control is engaged. ALWAYS
release wheel drive control before
starting unit.
STOP GO
OM1245
GO
Figure 8
Figure 9
Fuel shutoff valve closed.
Fuel shutoff valve open.