Filter
Top Products
GB - 10
7. Fill engine crankcase with oil. See
engine manual.
8. Set-up mower for bagging, side
discharge or mulching. See MOWER
SET-UP on page 14.
NOTE: Bagging is not standard on push
models. See ACCESSORIES on page 24 for
kit part numbers.
9. Fill fuel tank. See FILLING THE FUEL
TANK on page 14.
10. Connect the battery. See BATTERY
(electric start models) on page 21.
11. Connect spark plug wire.
12. Check the engine/blade control feature.
Try starting the engine without the
engine/blade control held against the
handlebar. Engine must not start. If
engine starts, stop engine and bring the
unit to your dealer for adjustment or
repair.
Figure 5
911150, 151, 152, 153
911154