Filter
Top Products
GB - 18
ENGINE/BLADE CONTROL
ADJUSTMENT
To adjust engine/blade control:
1. Loosen cable nuts away from bracket.
2. Squeeze z-bend bracket at engine end
of cable toward front of unit and hold in
place.
3. Pull cable down from bracket until there
is no slack in cable.
Figure 11
Pin
Hole
OM1800
911098, 100
Figure 12
1. Handlebar
2. Adjustment Hole
3. Support Bracket
4. Fasteners
5. Brace
911094, 095, 394
5
1
3
4
4
2
2
OM1660
OM1010
OM1040
No slack
OM106
1