Aquatic AI37LUX6036 Hot Tub User Manual


  Open as PDF
of 1
 
SPECIFICATIONS:
Rough-In Plumbing
Measurements
luxEAIr SErIES MODEL # AI37LUX6036 / AI32AIR6036TO (Tub Only)
luxEAIr 37 MOTIF
36 1/2”
Pump
Blower
6”
Deck
Width 3”
Total
Width 5”
GENERAL SPECIFICATIONS:
Tub Size 60 1/2” x 36 1/2” x 25”
153.7 cm x 92.7 cm x 63.5 cm
Bathing Well 37.5” long
19” wide
22 3/4” interior depth
Maximum Water Depth 17 3/4”
Shipping Weight 221 lbs. / 100 kg
Tub Weight Filled 769 lbs. / 349 kg
Tub Only Weight 95 lbs. / 43 kg
Weight w/Equipment 153 lbs. / 69 kg
Gallons to Overow 74 gal. / 281 L
Gallons to Operate 55 gal. / 208 L
ELECTRICAL SPECIFICATIONS:
Pump 1.75 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
OPTIONAL EQUIPMENT:
• Chromatherapy LED Lighting
• Comfort Pillow - Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished
Nickel, Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
Only)
• Hand Held Jet - Chrome or Polished Brass
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Fax-On-Demand
Document # 1295
STANDARD EQUIPMENT:
7 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 1 Recessed Rotary Massage Jet
Air Bath System:
- 49 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- 3 Massage Settings: Constant, Wave and Pulse
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
Aquatic Quality Features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- 1.5 kW Inline Maintenance Heater
- “Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-Leved ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
Back
Angle
12˚
January 2008
14”
20 1/2”
60 1/2”
36 1/2”
22 1/4”
25”
56”
57”
33 1/2”