Filter
Top Products
3
4
USING THE REMOTE CONTROL
Below the control box you can find the panel with two screws to fix Aries 6500.
To plug in the remote control, remove the screws and
the small panel to disclose the inlet.
The three remote control buttons’ function
simi larly to control box buttons. Once the
remote con trol is plugged in, you may use both panels
to adjust the scope.
The remote control can be attached to the
weapon of your choice through whatever means
suiting your shooting style and grip best. We
suggest an elastic Velcro® loop fastener sim
ilar to the trigger switches found on weapon-mounted
laser pointers.
SLEEP MODE
One of the greatest new features that your Smart scope has is the SLEEP mode. This feature
has been designed to considerably extend the period of scope’s functioning, to set the scope to
memorize your initial settings and endure battery’s life (by settings we mean only digital settings
which include brightness of the tube, brightness of the
reticle, and magnitude of the IR.) Here is a description as
to now the sleep mode functions:
The scope will automatically shut down if it does not
sense any activity (i.e. pressing any of the buttons o r
simply moving the scope back and forth away
from your face) for 20 minutes. When activat-
ing the sleep mode the scope will first warn you by
turning off the reticle for 10 seconds. I f
you intend is to keep using the scope simply touch any
key and the scope will reactivate.
One of the reasons for the SLEEP mode
being programmed into your scope is t o
keep the light inten-sifier tube and batteries safe in case you forget to turn your unit off. If you notice
that the reticle turned off after 20 minutes just push the SL button and the scope will return to its
previous settings.
To put your scope in the “SLEEP” mode any time, just push the SL button and “-” simultaneously.
Push SL to return to previous settings and the SMART scope will remember them. This feature will
come very handy, if you are waiting for game to come: you can prepare all of the settings, place
the unit in SLEEP mode and activate it precisely when you need it. To disable the proximity sensor
press SL and “+” simultaneously. In order to turn the proximity sensor back on, press SL and “+”
simultaneously again.
NOTE: The scope is capable of running in SLEEP mode for more than 10 (ten) days and will be ready
for use any moment. Remember, you don’t have to turn the unit off while you are using it (SMART sight
will remember all the settings). Use the master ON/OFF switch only to store the scope. The proximity
sensor works best in the dark environment. Daylight testing and/or other situations with strong lighting
may result in a temporary decrease of the proximity sensor performance.
“SL” button
Control panel
“–” button