American Standard 2908.178 Outdoor Shower User Manual


  Open as PDF
of 2
 
H30
© 2008 AS America Inc.
REMINISCENCE™
SOAKING BATH TUB
HIGH GLOSS
Revised 7/02
NOTES:
*
REFER TO FITTING INSTALLATION INSTRUCTIONS FOR SUPPLY DIMENSION.
● TRANSITION SEAL PROVIDED FOR 1 1/2" O.D. WASTE CONNECTION.
▼ LOCATION OF SUPPLIES FROM FINISHED WALL 87MM (3-1/2") MINIMUM - 340MM (13 3/8) MAX.
2908.020 WITH WHITE TEXTURED EXTERIOR.
2908.178 WITH BLACK TEXTURED EXTERIOR.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL FLOOR AND WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
953mm
(37-1/2)
*
724mm
(28-1/2)
114mm
(4-1/2)
140mm
(5-1/2)
127mm
(5)
89mm
(3-1/2)
TYP.
343mm
(13-1/2)
57mm
(2-1/4)
C/L OF 1/2 NPT
SUPPLIES
C/L OF
DRAIN
FINISHED WALL
FINISHED
FLOOR
REMINISCENCE
FOOT
1-3/8 O.D.
TAILPIECE
C/L OF
OVERFLOW
38mm
(1-1.2)
REMINISCENCE
BALL &
CLAW FOOT
1832mm
(72-1/8)
464mm
(18-1/4)
REF.
870mm
(34-1/4)
REF.
692mm
(27-1/4)
584mm
(23)
OUTLINE OF
SKID RESISTANT
SURFACE
H
C
C/L
368mm
(14-1/2)
203mm
(8)
508mm (20)
699mm
(27-1/2)
108mm
(4-1/4)
114mm
(4-1/2)
324mm
(12-3/4)
FINISHED WALL
1/2 N.P.T. INLETS
WALL FLANGES
W/SCREWS
PROVIDE CROSS
BRACING IN WALL
FOR ANCHORS
72-1/8 x 37-1/2 x 27-1/4 In.
(1832mm x 953 mm x 692mm)
130 Lbs. (59 Kg.)
413 Lbs. (186 Kg.)
34 Gal. (129 L)
18 x 42 In. (457mm x 1067mm)
67 x 31 In. (1702 x 787mm)
14 In. (356 mm)
22 LBS./Sq. Ft. (107 Kgs/Sq. m. )
23.8
48.3
GENERAL SPECIFICATIONS FOR 2908 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
 previous